ATL10 linear actuator

ATL 10 linear actuator 1.lifelong lubriation 2.maintenance free 3.can be customized according to customer requirements

ATL 10 linear actuator   Dynamic load up to 3.000 N
Acme screw linear actuator with DC worm geared motor. Bronze worm wheel and bronze acme nut. Housing in aluminium alloy. Protective tube in anodized aluminium, push rod in hard cromed steel tube. Lifelong lubrication, maintenance free.
Max load [N]	3.000
Max linear speed [mm/sec]	100
Standard strokes lenghts [mm]	100, 200, 300, 400, 500, 600, 700, 800
Main features
Rod diameter [mm]	25
Protective tube diameter [mm]	36
Max static load - pull [N]	3.000
Max static load - push [N]	4.000
Actuator's weight stroke 100 mm [kg] 1,7Additional weight each 100 mm [kg] 0,3Duty cycle 30% over 10 min at 25°C room temperature.5 gear ratios available.10 different linear speeds available.Acme screw 1 or 2 starts.On request: special stroke lengths.
Input versions
Integrated motor with shaft and fixing flange special design.On request: motor mounting on the opposite side (left hand).On request: rear fixing turned 90°.
Electric motors
AC 3-phase motor 230 / 400 V 50 Hz IP 55 F with or without ventilation system, with terminal box;AC 1-phase motor 230 V 50 Hz IP 55 F with ventilation system, with terminal box and capacitor 12,5 microFarad;DC motor 12 V or 24 V IP 54 F with motor cable length 1,5 meters.AC or DC motors available with or without brake.Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.
Accessories
Reed switches as stroke end switches;electrical stroke end switches;front attachments: clevis end, ball joint, rod end;rear fixing bracket;overload safety clutch;incremental encoder EH38 available with DC motor.

ATL10 linear actuator